INA Linear Guide Block KWVE Linear Bearing Guide Trolley Carriage

INA Linear Guide Block KWVE Linear Bearing Guide Trolley Carriage

This linear guide block is original Germany linear bearing from Schaeffler. INA linear carriage is widely used in high precision CNC machines, production lines.
RicoCNC supplies original INA linear slider blocks.
Such as
KWVE 25B G3 V1
KWVE 25B G2 V1
KWVE 25B G4 V1
KWVE 25B G3 V2
KWVE 30BL G1 V1
KWVE 30BL G3 V1
KWVE 35BL G1 V1
KWVE 35BL G3 V1

INA Linear Guides:
RWU..-E      
standard carriage with full complement recirculating roller system for linear recirculating roller bearing and guideway assembly, for oil or grease lubrication    
RWU..-E-L   
long carriage with full complement recirculating roller system for linear recirculating roller bearing and guideway assembly, for oil or grease lubrication
RWU..-E-H      
high, narrow carriage with full complement recirculating roller system for linear recirculating roller bearing and guideway assembly, for oil or grease lubrication
RWU..-E-HL      
high, narrow, long carriage with full complement recirculating roller system for linear recirculating roller bearing and guideway assembly, for oil or grease lubrication
KWE      
standard carriage for two-row linear recirculating ball bearing and guideway assembly
KWE..-H      
high, narrow carriage for two-row linear recirculating ball bearing and guideway assembly
KWVE      
four-row; design with anti-corrosion protection possible
KWVE..-B      
four-row; design with anti-corrosion protection possible
KWSE      
standard carriage for six-row linear recirculating ball bearing and guideway assembly
KWSE..-L      
long carriage for six-row linear recirculating ball bearing and guideway assembly
KWSE..-H      
high, narrow carriage for six-row linear recirculating ball bearing and guideway assembly
KWSE..-HL      
high, narrow, long carriage for six-row linear recirculating ball bearing and guideway assembly
KWEM      
standard carriage for miniature linear recirculating ball bearing and guideway assembly, corrosion-resistant, two-row
KWEM..-L      
long carriage for miniature linear recirculating ball bearing and guideway assembly, corrosion-resistant, two-row
KWEM..-C      
short carriage for miniature linear recirculating ball bearing and guideway assembly, corrosion-resistant, two-row
KWEM..-W      
wide carriage for miniature linear recirculating ball bearing and guideway assembly, corrosion-resistant, two-row
KWEM..-WL      
wide, long carriage for miniature linear recirculating ball bearing and guideway assembly, corrosion-resistant, two-row
KWEM..-WC      
wide, short carriage for miniature linear recirculating ball bearing and guideway assembly, corrosion-resistant, two-row
KWME..-C      
carriage for miniature linear recirculating ball bearing and guideway assembly, with anti-corrosion protection
TKVD      
half guideway for linear recirculating ball bearing unit
TKVD      
full guideway for linear recirculating ball bearing units
LFCL      
hollow section carriage, clearance-free; corrosion-resistant design possible
LFL..-SF      
open carriage, standard design, clearance-free; corrosion-resistant design possible
LFL..-E-SF      
open carriage, wide, long design, clearance-free; corrosion-resistant design possible
LFLL..-SF      
non-locating bearing carriage, clearance-free
LFKL..-SF      
compact carriage, clearance-free; corrosion-resistant design possible
LFKL..-E-SF      
compact carriage, wide, long design, clearance-free; corrosion-resistant design possible
LFKL..-EE-SF      
compact carriage, wide, long design, clearance-free; corrosion-resistant design possible
LFDL..-B      
bogie carriage; corrosion-resistant design possible
LFDL..-SF      
bogie carriage; clearance-free; corrosion-resistant design possible

INA linear bearing guide ways
KWE15-H     28     34     54,5     
KWE20-H     30     44     70,4     
KWE25-H     40     48     80,5     
KWE30-H     45     60     92,9     
KWE35-H     55     70     106,1

INA KWVE 15 20 25 30 W WL B L H HL E N NL S SL
INA linear bearing guide ways
KWVE        
four-row; design with anti-corrosion protection possible  
KWVE..-B        
four-row; design with anti-corrosion protection possible  
KWVE..-B       
standard carriage, four-row, full complement ball set 
KWVE..-B-L        
long carriage, four-row, full complement ball set  
KWVE..-B-H       
high, narrow carriage, four-row; corrosion-resistant design possible  
KWVE..-B-HL       
high, narrow, long carriage, four-row; corrosion-resistant design possible  
KWVE..-B-EC        
expanded interchangeability, short carriage, four-row; corrosion-resistant design possible 
KWVE..-B-ESC       
narrow, short carriage, four-row, full complement ball se  
KWVE..-B-N        
low carriage, four-row; corrosion-resistant design possible   
KWVE..-B-NL         
low, long carriage, four-row; corrosion-resistant design possible   
KWVE..-B-S        
narrow carriage, four-row; corrosion-resistant design possible  
KWVE..-B-SL       
narrow, long carriage, four-row; corrosion-resistant design possible  
KWVE..-B-SN        
narrow, low carriage, four-row; corrosion-resistant design possible   
KWVE..-B-SNL        
narrow, low, long carriage, four-row; corrosion-resistant design possible  
KWVE..-B-HS        
standard carriage, High Speed design, four-row, full complement ball set   
KWVE..-B-N-HS         
low carriage, High Speed design, four-row, full complement ball set  
KWVE..-B-H-HS         
high, narrow carriage, High Speed design, four-row, full complement ball set   
KWVE..-B-S-HS         
narrow carriage, High Speed design, four-row, full complement ball set  
KWVE..-B-SN-HS       
narrow, low carriage, High Speed design, four-row, full complement ball set 

RicoCNC also supplies many other original bearings, linear cage, such as HIWIN, Franke, INA, NSK, Bosch Rexroth, SKF, THK, Rollon, TBI, PMI, ABBA, CSK, STAF, THK, etc.

RicoCNC also supplies a wide range of cnc spare parts, cnc tooling system, cnc cutters, etc.
All products are 100% original, welcome your inquiry.

Long Foam Cutting Tools EPS Foam Milling Router Bits work with customers...

Long Foam Cutting Tools EPS Foam Milling Router Bits Ball End and Flat End
Model: Ball End and Flat End Long flute foam cutting router bits

These long series foam end mill and ball nose router bits are widely used with robot milling machine and huge CNC router which used to cut molds from EPS foam, polyurethane foam, eva foam, plastic, etc. The long foam cutting tools are great for extended reach machining, deep foam cutting, cnc sculpting big items, cnc routing foam. They are helpful mills for building cnc foam moulds and for advertising signs making.

Long Foam Milling CNC Tools Features:
1, High Speed Steel (HSS) hardness: HRC 61-64.5°
2, Sharp spiral blade for clear smooth finishing (4 flutes or 6 flutes or 8 flutes)
3, Extended Reach for deep foam cutting, carving and milling
4, Foam milling bits size could be DIY customized

Ricocnc can supply round end (ball end) and flat end (End mill) foam mill bits:
Diameter: 6mm, 8mm, 10mm, 12mm, 16mm, 20mm, 25mm, 30mm, 32mm, 40mm, etc.



Long frog mill bits, welcome to check:

https://www.ricocnc.com/products/248-Long-Foam-Cutting-Tools-EPS-Foam-Milling-Router-Bits-Ball-End-and-Flat-End.html

Collets identification guide: how to distinguish the collet model and size

For CNC tool clamping systems collets, as different countries have different standards, there are ER collets, collets TG, collets SYOZ / EOC / RDO, collets DA, collets SK, collets C type, collets K type, etc. Some of these collets model look alike, so makes users confused when they replaced the old collets. RicoCNC now shows you the collet identification guide:

Collets ER, TG, SYOZ/EOC/RDO, DA, SK are all unique measures. Even if brands have worn away, noted the shape and carefully measure your collets, you can determine what types and sizes of collets it is. Measure the length (L) and depth (D) collets. Then use the guide below to select the right collets replacement.

ER Collets	L	D
ER 8	13mm (0.51”)	8.5mm (0.33″)
ER 11	18mm (0.708″)	11.5mm (0.45″)
ER 16	27.5mm (1.08″)	17mm (0.67″)
ER 20	31.5mm (1.24″)	21mm (0.83″)
ER 25	34mm (1.34″)	26mm (1.02″)
ER 32	40mm (1.57″)	33mm (1.3″)
ER 40	46mm (1.81″)	41mm (1.61″)
ER 50	60mm (2.36″)	52mm (2.05″)

TG Collets	L	A
TG 75	47mm (1.85″)	27mm (1.06″)
TG 100	60mm (2.36″)	35mm (1.38″)
TG 150	76mm (3″)	51mm (2″)

SYOZ / EOC Collets	L	D
EOC 8	26mm (1.026”)	14.4mm (0.567″)
SYOZ 20	34mm (1.34″)	20mm (0.78″)
RDO 20	34mm (1.34″)	20mm (0.78″)
407E	34mm (1.34″)	20mm (0.78″)
EOC 12	34mm (1.34″)	20mm (0.78″)
SYOZ 25	52mm (2.06″)	35mm (1.38″)
RDO 35	52mm (2.06″)	35mm (1.38″)
462E / SYOZ 25	52mm (2.06″)	35mm (1.38″)
EOC 32	60mm (2.36″)	43.7mm (1.72″)

DA Collets	L	A
DA 180	1.625″	1.035″
DA 100	1.438″	0.769″
DA 200	1.188″	0.531″
DA 300	1.000″	0.375″

If any needs of cnc spare parts, cnc toolings, or cnc machines, welcome to contact RicoCNC.

Mounting Instructions for ER collets and Nuts

For a green hand to set up or take out er collets with nut, if not fix the collet well, it will be very dangerous. Wrong fixture can not hold the cutter bits tightly, high speed spindle rotating and cutter bits cutting will easy get the cutter bits fly out. That is very dangerous.
Now RicoCNC will guide you how to set up and take out er collets with nut.

Mounting instructions for ER collets and nut:
1, Put the collet into the nut, turn the collet slightly. Push it into the nut at the offered direction evenly when the offset flange sinks into the undercut of the collet. Push on the bottom of the collet until the collet completely enters, and lines up with, the nut. As the collet moves into proper alignment, you will hear and feel a distinct click, indicating that the top of the collet is safely.

2, Fix the nut and the collet on the spindle rotate the nut until the collet is in pressing, wipe the straight shank of cutter and insert it into the pilot hole. The nut / collet assembly can now be screwed onto the spindle, loaded with one of those great Precise Bits. Tighten the nut with a wrench till the cutter is clamped heavily and made ready to use. (Caution: never tighten the nut without cutter in it for it will break).

3, When changing the cutter bits, remove the nut / collet from the spindle and remove any bits from the collet bore. Loosen the nut and it shall bring out the collet and the cutter together. And then draw the cutter out, push out slightly the collet in the offered direction, it shall be ready for any change of the cutters.

Collets mounting instructions Keypoint:
1, Place collet inside nut and rotate the nut to engage with the extractor spiral in collet groove
2, Only then mount nut and collet together into the collet chuck holder or machine spindle
3, Removing the collet from the nut is also quite easy. Loosen the nut, take out the cutter, then remove the collet from the nut.

NOTE
Never activate (turn on) a spindle without a tool securely fastened inside the collet, and the nut properly tightened.
Failure to follow this simple precaution could lead to damage to the spindle, collet, nut and any unfortunate bystander.

RicoCNC supplies a wide range of cnc spares, cnc router bits, woodworking machine accessories, cnc machines, etc.

Welcome your inquiry.

RicoCNC will Participate in the 23rd Worldbex in Manila Philippines

ricocnc worldbex booth no

RicoCNC will Participate in the 23rd Worldbex in Manila Philippines
14-18 March 2018, 10:00am – 8:00pm
World Trade Center Metro Manila, East Wing A
Booth No.: 73
Welcome to visit and have meeting with you.

Worldbex is a 5 day event being held from 14th March to the 18th March 2018 at the World Trade Center Metro Manila in Manila, Philippines. This event showcases products like construction equipment, building materials, interior decor items, garden and landscaping tools and accessories, DIY home improvement kits, lighting systems, alternative energy sources and such other products in an ambience well suited for extensive business growth and networking etc. in the Building Construction, Home Furnishings & Home Textiles, Architecture & Designing, Real Estate Agents industries.

For more than a decade, WORLDBEX or The Philippine World Building and Construction Exposition has been a haven for the local and international building and construction industry, supported by acknowledged sectors of society and a visitor profile of more than 150, 000 per year, it is dubbed to be Asia’s most attended construction exposition. WORLDBEX holds a good number of global ties with countries such as Austria, Australia, Belgium, Brunei, China, Finland, Hongkong and Germany to name a few of the 25 participating countries, it is an ideal venue for business transactions and introduction of innovations.
WORLDBEX is known for putting together over 500 exhibiting companies and more than a thousand booths in a Wi-Fi ready exhibit area of 30, 000sqm ranging from building materials equipment services, construction design and development, for lining up the country’s best architects and interior designers, plus the leading manufacturers and furniture exporters, for showcasing the top colleges and universities in interschool interior design competition and for bringing in the biggest names in the local and international building and construction scene for seminars.
Along with these impressive parts of the show, WORLDBEX is the only construction show in the country that offers Business Matching Service during a show covering the needs of both the consumers and producers. No wonder 80% of its visitors are more likely to do business with WORLDBEX exhibitors. 

If anything we can help with cnc router machines and cnc spare parts, welcome to contact us.

One stop shop store for cnc spare part and toolings www.cncsparetools.com

A new one stop shop store for cnc spare part and toolings, 100% origin high quality in good price： http://www.cncsparetools.com/
You can get all the cnc tool fingers, tool holders, collets, pull stud, tighten fixtures, cnc router bits, foam mill bits, wood lathe knives, cnc router spare parts and edgebander accessories, etc.

Twin Moving Tables 5 Axis CNC Router Machining Centers

Twin Moving Tables 5 Axis CNC Router Machining Centers

This 5 axis CNC router machine is with twin moving table. Two tables interaction used, increase 30%-50% efficiency. Also you can combine the two moving worktables together for big objects machining, just like single moving table 5 axis CNC router. 
5 axis moving table machining centers feature a stationary bridge with moving table design for full 5 axes machining and contouring. These high-precision machines are commonly used for contouring, trimming and drilling processes, widely used in Aerospace, commercial, composites, plastics, wood, gypsum, aluminum, stretched aluminum, honeycomb, plastics multi-axis machining, bakelite, wood cabinets & case goods, 3d digital sculpture, architectural effects, product concept models, molds plugs & tooling, etc.

5 Axis Moving Table CNC Router Parameters:

Model	T1-5A251509	T1-5A302009
X/Y/Z Working area	2500mm*1500mm*900mm	3000mm*2000mm*900mm
A/C axis	A axis: ±120°   C axis±540°	A axis: ±120°   C axis±540°
5 axis working area	2000mm*1000mm*600mm	2500mm*1500mm*600mm
Working table size	1000mm*1100mm	1500mm*1500mm
Fast speed (G00)	25m/min	25m/min
Working speed( G01)	15m/min	15m/min
Positioning precision	X/Y: 0.06mm   Z: 0.02     A/C: 0.001°	X/Y: 0.06mm   Z: 0.02     A/C: 0.001°
Spindle	Italy HSD ATC Air-coold 5.5KW 24000RPM	Italy HSD ATC Air-coold 5.5KW 24000RPM

5 Axis CNC Machining Centers Features:
1, Moving table designs with very high machine stability, cutting rigidity and machining capability, suitable for all kinds of material heavy cutting requirement.
2, Twin moving worktables work as two work stations, also can control two worktables moving together as one big moving worktable for big objects machining, increase the efficiency and productivity.
3, High rigidity linear guide ways on the X, Y, Z axis offers heavy duty cutting, fast movement and low abrasion capabilities. Rigidity and movement control features are substantially increased.
4, Wide span symmetrical center-driven ball screw design for X Y Z-axis transmission, high precision.
5, Multiple-axis robotic heads, can trim and route parts that are deep, or have multiple surfaces and angles, such as vacuum or pressure formed parts.
6, Lynuc/Syntec 5 axis control system with pitch compensation
7, Japan Yaskawa servo motor and driver system with encoder
8, Italy HSD air cooeld auto tool changer spindle with Taiwan Delta frequency
9, High precision 5 axis head, which C axis travel is ±540°, this makes CNC programming more simple, avoid repeat tooling lift which due to travel limit.

5-Axis Dual Table CNC Router Machining Industries:
Wood - Wood industry including furniture (solid wood and upholstered), custom windows and doors, cabinets, exhibits and store fixtures, and many other types of wood projects.
Plastic, foam, resin, glass fiber, carbon fiber, aramid
Aerospace, energy and defense, wind blade, boat model, automotive, marine, railway and recreational vehicle industries, etc

We have over 10 years of experience in 5 axis cnc routing and producing 5 axis cnc routers for sale. 

RicoCNC also can supply 3 axis cnc routers, 4 axis cnc routers and CNC spare parts.
Welcome your inquiry!

cnc 5 axis machine, 5 axis cnc machine, 5 axis cnc machine for sale, 5 axis cnc machining center, moving table 5 axis, 5-axis moving table, 5 axis twin moving tables, 5 axis moving table cnc router, moving router table, twin moving tables, 5 axis machine