ISO30 ER32 42L Tool Holders for HSD ATC Tool Changer CNC Routers

ISO30 ER32 42L Tool Holders for HSD ATC Tool Changer CNC Routers
ISO 30 ER32-42 Collet Chuck Tool Holders 

This ATC ISO30 Tool Holder is a 50mm flange diameter which is commonly used on most common woodworking cnc routers. Such as CNT, Biesse, FMT, DMS, Masterwood, Flexicam, Shop Sabre, Techno, CNT Motion, CR Onsrud, NEW CNC, Northwood, Omnitech, Precix, Quintax, Ritter, Routech, SCM, Shoda, Shopbot, Thermwood, Weeke, Quintax and Chinese CNC Machining Centers.

HSD ISO30 Toolholders for CNC Routers Features:
Tool holder model: ISO30-ER32-42L
ISO30 Tool Holder Collet Size: ER32
Material: 20CrMnTi
Balanced: 30,000rpm, G2.5
Pullstud: HSD
Country of Origin: China
Compatibility: Can be used on CNC router machines with HSD spindles.
Precision ground surfaces. Nickel Plated. Anti-rust.
Comes with clamping nut.
These high quality ISO30 Toolholers featured with ER32 collet interface to hold tools with a shank diameter up to 20mm, 3/4". They are precision manufactured in China, and are balanced to 30,000rpm.  

ISO30 ER32 42L toolholder HSD spindle tool holders are available in stock for quick delivery.

RICO CNC carries the full line of CNC router spare parts and more, including cnc tool forks, spindles, cutter bits, HSK toolholding system, BT toolings, etc. If you do not see something you are looking for here, feel free to contact us with your requirements.

Payment can be made by Western Union, Paypal, T/T.

Welcome your inquiry!

CNC Toolfork ISO30 SK30 HSK63F for Woodwork With Drive Dowel Insert Locating Pins for Toolchanger Aggregate

CNC Toolfork ISO30 SK30 HSK63F For Woodwork With Drive Dowel Insert Locating Pins for Toolchanger Aggregate
CNC Toolfork ISO30 SK30 HSK63F with Plastic Drive Dowel Small Inserts

These CNC Toolforks for ISO30 SK30 & HSK63F tool changer holders are with a small plastic drive dowel. At the back of the toolforks, there is a small pocket 17x14 mm in the tool holder fork, then put in a little insert for aggregate. These small inserts we called it plastic drive dowel or toolholder alignment pin or toolholder locating dowel or toolholder sensor pin. They are locating pins for spindle toolholder positioning, let the tool holder to stop at a correct postion.

CNC Tool forks for ISO30 & SK30 & HSK63F Features:
1, Our toolforks contain a metal insert surrounded by plastic. With the metal insert mechanical fixture, the tool forks are strong.
2, The cnc toolforks use imported USA Dupont white plastic material, high quality, reinforced and anti-explosion. The material used is the same as from Italy HSD.
3, Rico CNC tool forks size is the same as Italy. Outlook is up to 95% as Italy. Life time can up to more than 90% of Italy made.
4, Our HSK63F forks tool holding force is designed for 10kgs, so normally within 8kgs is no problem. Italy standard is 8KGs.
5, ISO30 toolfork holding force is designed for 6kgs.
6, These CNC replacement tool forks can last more than 60,000 times tool changing cycles. We have tested.
7, These tool holder forks when istalled utilize 2 steel dowel pins for an accurate and self location on the tool changer magazine. Then use two bolts to fix the toolforks, no need to fix extremely tight. Just make the CNC toolforks not move is ok.
8, It is a very easy item to replace.

RICO CNC supplies a series CNC accessories such as tool holders, tool forks, collets, etc for HSD, Hiteco, Biesse, Homag, Weeke, Flexicam, KOMO, CR Onsrud, Northwood woodworking machine, etc.
Also supply useful CNC spare parts and cutter bits etc. 

Payment could be made by Western Union, T/T bank transfer and Paypal.

Welcome your inquiry.

Industrielle Portable 3D Scanner Equipment to CNC Moulding Milling Machine

Industrielle Portable 3D Scanner Equipment to CNC Moulding Milling Machine
White light type 3d scanner

This industrial 3d scanner is for all major idustries. An integrated 3D scanner and software system that seamlessly brings physical objects into CAD/CAM and super charges your product development process. Also 3d scanner machine is helpful for professional scan-based design, reverse engineering and quality 3D inspection, cnc machine moulding, 3d carving, etc.
3D white light scanners are usually tripod mounted. Scan data is obtained shot by shot, as a grid of light is projected and laid over the component being scanned. As a scan is completed the grid is modified, and the scanner determines the 3D coordinates by calculating the returned patterns.

Industrielle 3d Scanner Machine Introduction:
1.) Portable design: Small size, small footprint, no noise, easy to disassembly and installation, very convenient to carry.
2.) "One-click" mark all points automatic splicing: Automatic splicing times of scanning data, the process is complete with “one-click”. Without manual intervention, no third party software, to ensure that the data does not appear stratified phenomenon.
3.) Non-contact scanning: Measurement without contact with anything, can easily measure the soft, easy to deformation objects; And can be move scanner when scanning large heavy objects, there is no limit to the trip.
4.) The noise of the point cloud processing and trim:  Can pruning and eliminate noise during scanning and at the end of the scanning. Due to use of high-end industrial lenses and original software de-noising module, can overcome the domestic like product cannot solve noise and floating point problem, save your post-processing and modification time.

Industrial 3D Scanners Features:   
1) Machine vision cameras (IDS, MADE IN GERMAN)
2) The original Japanese lens, USA projector
3) International brands grating light source
4) 2011 annual world's top point cloud processing algorithms
5) Support large computer memory (8G-64G), large data massive processing, Microsoft of WINDOWS7 X64, certified software play using advanced computer advantages
6) International software interface to support the overwhelming majority of file types
7) Shooting type of flexible, the lens can be adjusted, large-scale scanning and macro scanning device
8) Automatic stitching, a variety of splicing options, based on object features or "Mark Point" or “rotary table”
9) Instantly scan, a resolution of 1.3 million -500 million is optional
10) Compatibility of various brands of computer motherboards, graphics cards normal use
11) The USB2.0 high-speed interface to adapt to most computers, do not need to purchase additional interface card

3D Scanning Equipment Parameters:

Model	SCAN-1M-12
Single Scan Range(mm)	360*240(adjustable)
Operating Distance	350--1200
Feature Accuracy	0.020--0.100
Minimum Devide	0.08-0.30
Resolution	1280*1024
Scannable Object Size	50mm-2000mm
Original Sensor place	GERMAN
Scan Speed	1.3 s/f
Scanning Type	White projector map
Data Interface	ASC,STL,IGS,OBJ
Registration Type	Automatic and best-fit registration
Align Type	Marker, Geom-feature Auto Align
Weight	7.5KG
Dimension (mm)	L380*W260*H110
Working Environment	Inner light
Hardware Interface	USB 2.0 (at least 2PORTS)
Operating System	Windows 7/32b&64b

Application of 3D Scanner Equipment:
For generating high resolution digital 3D models accurately, and are great for manufacturers of furniture, arts & crafts, molds industry, advertising, visual effect studios, and research labs that require 3D scan data for applications such as inspection, measurement, visualization, reverse engineering, or rapid prototyping.

What is 3D Scanner? How many 3D Scanner Types? What is the Usage of 3D Scanner?

What is 3D Scanner? How many 3D Scanner Types? What is the Usage of 3D Scanner?

What is 3D Scanner?
Any device that measures the physical world using lasers, lights or x-rays and generates dense point clouds or polygon meshes can be considered a 3D scanner. 

How many 3D Scanner Types?
In the market there are 3 models common 3d scanner: laser 3D scanners, white light 3D scanners and CT 3D scanners. 
The laser 3D scanners are mounted on a ROMER arm or tracked with an NDI optical system. This allows us to capture scan measurements in an area up to 18 feet in diameter and at a rate of nearly 500,000 points per second. 
The white light 3D scanners, which are mounted on a tripod, capture more than 1,000,000 points per second. In a single shot, the white light scanners take measurements in an area ranging from a few square inches to a few square feet. 
CT 3D scanners allow for the easy measurement of the internal structures of parts by generating a point cloud from a number of two dimensional x-ray pictures.

Structured Light (White or Blue Light) 3D Scanners are widely used.
Structured light scanners also use trigonometric triangulation, but instead of looking at laser light, these systems project a series of linear patterns onto an object. Then, by examining the edges of each line in the pattern, they calculate the distance from the scanner to the object’s surface. Essentially, instead of the camera seeing a laser line, it sees the edge of the projected pattern, and calculates the distance similarly.

Every day, thousands of companies are using 3D scanners and software to:
1, Create CAD models of real parts to capture lost designs, update existing products and make new ones
2, Verify product quality by comparing manufactured parts to CAD designs
3, Make mass customized products for health care, dentistry and fashion
4, Scan entire buildings to create accurate 3D models
5, And much more

3D scanners and accompanying software are now within the reach of many. Scanners are faster, less expensive and more accurate. 3D scan processing software is more automated, creates better results, and works faster than ever before. It is a popular equipment for education, reverse engineering, 3d inspection, 3d printing & rapid prototyping, etc.

Industrial 3D Scanner Scanning with Geomagic Software for CNC Machine

Industrial 3D Scanner Scanning with Geomagic Software for CNC Machine

Model: SCAN-1M-12

3D Scanner for CNC Router Applications:

Styling, Design and Analysis such as Industrial design, Technical drawings, 3D-scan-to-CAD, Die and mold design, Handmade model digitizing, Custom part design, 3D relief design, jewellery scanning.

Widely used in automobile, motorcycle, mold making, precision machinery, footwear, household  appliances, cultural imitation, costume design, designing studio, heavy industry, light industry, 3D statues making and other manufacturing industries, greatly enhance the industry productivity.

3D CNC Scanner Features:

1. Scan any type even cavity, groove and fracture surface. Scan one surface once, fast speed.

2. Mark point auto-splicing function. Scan the fixed object several times, after scan each time, it will splice cloud data automatically, then delete the overlap point.

3. With Global error correction module, make sure data will not have delamination; When scan large object, it iseasy to escape accumulate error.

4. Have 3D editor function, can turn, move, marrow data easily and edit and adjust data.

5. Many data type. Such as STL, PLY, ASC, AC and so on.  Then Convert to AutoCAD, Geomagic Studio, Rapid Form, ImageWare for Post-Processing.

6. Can convert to many kinds of CAM software such as POWERMILL, MASERCAM, UG, PRO/E, SOLIDWORKS, GEOMAGIC STUDIO, COPYCAD, POLYWORKS, ARTCAM, Wentai, Ucancam, ArtCUT, ArtEngrave etc.

Industrial 3D Scanner Parameters:

Model	SCAN-1M-12
Single Scan Range(mm)	360*240(adjustable)
Operating Distance	350--1200
Feature Accuracy	0.020--0.100
Minimum Devide	0.08-0.30
Resolution	1280*1024
Scannable Object Size	50mm-2000mm
Original Sensor place	GERMAN
Scan Speed	1.3 s/f
Scanning Type	White projector map
Data Interface	ASC,STL,IGS,OBJ
Registration Type	Automatic and best-fit registration
Align Type	Marker, Geom-feature Auto Align
Weight	7.5KG
Dimension (mm)	L380*W260*H110
Working Environment	Inner light
Hardware Interface	USB 2.0 (at least 2PORTS)
Operating System	Windows XP/7/32b&64b

3D scanning samples:

Foam Endmill Bits Cutting Specs for Foam Milling

Foam Endmill Bits Cutting Specs for Foam Milling

Polyurethane Foam, Polyethylene Foam, Extruded Polystyrene Foam (XPS), Expanded Polystyrene (EPS) and Ethylene Vinyl Acetate (EVA), insulation foam and similar types of foams are widely used for mould making, statues making, big 3d signs making.
A big size cnc router with a big long foam mill bits can do these kind of foam milling job. But how to choose the foam cutters? And how to set rpm specs?

Usually two kinds foam mills widely used, ball end and flat end. Flat end foam router bits widely used for foam cutting, rough cutting,ball end foam router bits widely used for foam cutting, finish carving. 
For fast milling, you can choose a big diameter shank and CEL foam bits.

How to set the specifications? 
The big foam bits RPM designed is 7000-10000RPM. 
For EPS foam milling, we suggest to set the spindle RPM at 8000RPM. It is good to the machine cutters and can get a good surface finish.

For example, cut 80mm thickness polystyrene, we suggest twice cutting, one path cut 40mm thickness, running 8000rpm, feed rate at 150mm/Sec. 
If you cut 80mm thickness once, run 8000rpm, feed rate should be within 70mm/Sec. Please try it.  

Other information for reference:
I usually mill with these bits at about 7,000 rpm, and 70 inches per minute. Depends on the foam. I usually set the feed to 70 ipm, since that is the fastest I want to run the machine. Then do a test cut, and turn the rpm down until the foam cutting sounds good, (sort of a slicing sound). Too much rpm for the feed rate, and it melts the foam. Not good since it builds up on the bit, and makes a ball on the end of the bit. 

My mill spends most of its time at lower RPM settings in foam, like around 8k. If you go much higher and don't increase your feed rates, you are probably burning and melting the foam as much as cutting it.

EPS is the common foam I use and I've run my 1" dia x 12" long 4 flute custom bit at 100% stepover at 6" deep, sometimes deeper. When you're manufacturing, cutting time is important. Hogging away as much material as you can with a large dia tool and then finishing with smaller tool is the way to go.

I do a lot of foam cutting like this for my customer. I use 2flt high spiral carbide end mill with a high sher on them. I run them from 100 to 300 ipm at about 10,000 rpm.We can supply a range of durable router bits made specifically for milling EPS, EVA and polyurethane foam, including regular and tapered cutters in ball end and end mill styles. Ball Nose and Flat Bottom End Mill styles available.
Payment can be made by Western Union, Paypal, T/T.
 Welcome your inquiry for the CNC spare parts and CNC Cutters.

SCM Group Morbidelli Clamping Fork for CNC ISO30 Toolholder

SCM Group Morbidelli Clamping Fork for CNC ISO30 Toolholder

This clampping fork is for Morbidelli cnc machine use. This holding fork is for Morbidelli ISO30 toolholder.

Morbidelli CNC Tool Holder Specifications:
1. Made in China, famous brand.
2. Imported POM plastic material, high quality, reinforced and anti-explosion.
3. Dynamic balance grade:  G2.5, 30000rpm
4. Yaw precision: 0.005mm

ISO 30 CNC Tool holder forks for Morbidelli toolholders are available in stock for quick delivery.

Rico CNC supplies high-quality CNC toolings, replacement and accessories. ISO30 tool forks, HSK63 tool gripper, BT30 BT40 tool cradles, CNC replacement finger for many automatic tool changers such as Biesse, CNT Motion, CR Onsrud, DMS, Flexicam, Multicam, Northwood, Homag, SCM, Unique and more.Payment can be made by Western Union, Paypal, T/T.
Welcome your inquiry!